Protection Detail | from £150 | 6-8 Hours
The entry level detailing service designed to meticulously deep clean the exterior of your vehicle and protect all vital surfaces, against the elements. The difference a full body decontamination alone can make, is quite remarkable and with thanks to the luxury detailing products manufacturer 'Autobrite' your vehicle will be far easier to clean, following this entry level service.
Enhancement Detail | from £200 | 1 Day
The enhancement detail introduces a single stage machine polish using a fine finishing polish and a soft polishing pad, to restore a far deeper level of gloss, to your vehicles paintwork. The single stage refining process is capable of removing in the region of 60% of the swirl marks that may currently be present and will, without a shadow of a doubt, achieve a huge amount of added clarity to the finish. This service acts as the base service, in preparation for a Pyramid ceramic coating.
Two Stage Paint Correction Detail | from £400 | 2 - 4 days
The two stage paint correction detail introduces a medium abrasive compounding stage, which is going to remove a serious amount of paintwork imperfections. The following refining stage using a finishing polish and a soft polishing pad, will then restore the paintwork, back to an incredible deep gloss finish. For most vehicles, this service will provide an amazing finish and usually achieves between 80 - 95% defect removal, depending on the vehicles current condition.
The Washing Process
- Wheels fully decontaminated including the brake calipers to remove iron fallout and tar deposits.
- Arches cleaned, tyre walls cleaned and exhaust tips cleaned.
- Door shuts and sills pre-rinsed and cleaned using a soft detailing brush and APC.
- Bodywork extensively washed using snow foam, the two-bucket method, prep shampoo and a soft wash mitt.
- A soft detailing brush and APC are used to clean the grilles, badges, filler cap area and window sills etc.
Bodywork Decontamination
- Two stage decontamination process to remove iron fallout/ferrous contaminants and tar deposits.
- Snow foam wash to ensure decontamination chemical remnants are fully removed.
- Paintwork, windows and lights are clay barred to remove all final surface contamination.
- Vehicle dried using soft microfibre drying towels.
- Gaps and crevices blown dry to remove the trapped water and to eliminate any chance of drips.
Machine Polishing
- Plastic trim and any delicate areas are masked using 3M tape to avoid polish stains.
- Full set of paint depth readings are taken to ascertain clearcoat levels and if any repair work has been carried out.
- Polish and pad spot testing to establish the most effective combination for your paint type.
- 1, 2 or 3 stage machine polish conducted over the entire vehicle, until the desired finish is achieved.
- Isolated wet sanding work can be carried out on any particular areas, to remove/diminish deeper scratches, scuffs, general heavier marks or even any previous paint touch up attempts.
- Paintwork wiped down with IPA (isopropyl alcohol) to remove the polish oils and residue, to form the ideal surface, for a wax, sealant or ceramic protection.
Wax / Protection
- Please visit the Ceramic Coatings page for full information, about the Pyramid ceramic coatings, that are currently available and the additional cost.
- Autobrite Banana carnauba wax is enriched with none stick PTFE, in order to create an ingenious protection shield for your paintwork. Thanks to the proverbial "teflon-pan-effect" dirt and insects barely can't adhere at all to the as smooth as glass paintwork surface. Keeping the daily driver protected, for up to 6 months.
Other Areas
- Autobrite Dungeon Master tyre dressing.
- Autobite plastic trim dressing.
- Autobrite window polish.
- Exhaust tips polished and protected.
- Chrome trim polished and protected.
- Plastic arch liners dressed.
- Detailing ‘swabs’ and tooth 'picks'.
- Final vehicle dust down, before customer collection.
